Set Weather Alert
Press WX button for more than 2 seconds to
activate Weather Alert.When activated the unit
will announce “Weather Alert On”in Voice Mode
or signal two beeps in Tone Mode. When in Wx
Alert On Mode, the Wx LED will blink slowly,
even though you do not hear the weather radio.
If a Weather Alert is received,“Weather Alert On”
will be heard in Voice Mode and then the
Weather Station broadcast will be heard telling
you about the severe weather.
Caution: Weather Alert will only operate if a Weather Station
is being received and the WxLED is blinking. If the Wx LED
stops blinking, you cannot receive a Wx Alert. If you have
not received a weather station for 1 minute,“Weather Signal
Lost”will be announced in Voice Mode or one beep will be
heard in Tone Mode and the Wx LED will stop blinking.
The ESD-9220 WX however, will still monitor for that station
to return. If, after 5 minutes the station is not received,
“ Weather Alert Off” will be heard and the ESD-9220 WX will
stop monitoring.Weather Alert can then be reset by turning
on the Weather Radio and finding a different weather station.
Operation
15
Operation
14
Turning On
Weather and
Changing
Stations
Set Weather
Alert
Note
If you set your ESD-9220 WX
to Weather Alert Mode, it
will automatically turn on
the Weather Radio if the US
Weather Service calls a
Severe Weather Alert. If
you receive a Weather Alert,
please listen to the
broadcast and take their
advice.
Note
If you try to turn on Weather
Alert and no station can be
received, the unit will not go
into Weather Alert Mode
and announce “Weather
Alert Off” in Voice Mode or
one beep will be heard in
Tone Mode and the Wx LED
will not blink.
Note
Both Weather On/Off and
Weather Alert On/Off
settings,including the last
station you were listening to,
are retained in memory even
when unit is turned OFF.
Note
Factory default setting is
Weather Off and Weather
Alert Off Mode.
Turning on Weather and Changing Stations
Your ESD-9220 WX will allow you to listen to any
of more than 550 local weather stations in the US
and Internationally. If any Radar, Laser, or Safety
Alert® signal is detected while you are listening to
Weather, it will automatically over-ride the weather
station and give you that alert.
Press and release Wx button to activate
weather radio.When activated the Wx LED will
come on and the unit will announce “Weather On”
in Voice Mode or signal two beeps in Tone Mode.
If no station is heard, press and release
CITY/Wx button to step through the
10 channels until a station is received and the
Wx LED stays lit.The WxLED acts like a signal
strength meter for the weather radio.When
the signal is strong, the Wx LED will stay lit. If
the station signal weakens, the Wx LED will
flicker or if the signal is completely lost, the
ESD-9220 WX will go into Radar Mode. When
a station cannot be received, the unit will
announce “Weather Signal Lost” in Voice Mode
or signal one beep in Tone Mode and the Wx
LED will turn Off.
Press and release Wx button again to turn off
weather radio.When deactivated the unit will
announce “Weather Off” in Voice Mode or
signal one beep in Tone Mode.
1
2
3
(10 pages)
(7 pages)
(49 pages)
(11 pages)
(8 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals