MODE FUNCTIONS
OPERATION
The Scan icon will continue to be displayed when
CTCSS privacy code scan is On. Your radio will
continue to scan CTCSS privacy codes and stop as
an incoming transmission is detected. Your radio
will remain on that channel/privacy code for ten
(10) seconds.
While setting CTCSS privacy code scan, if you do
not press any buttons for fifteen (15) seconds
your radio will automatically return to LISTENING
MODE on the channel/privacy code that was
displayed before you entered Mode Functions.
During An Incoming Transmission, You
Can Choose From The Following:
a. Press and hold the TALK button to
communicate on that channel/privacy code.
Your radio will remain on that
channel/privacy code and return to
LISTENING MODE.
b. Press the CHANNEL UP or CHANNEL DOWN
button to resume scanning CTCSS privacy
codes.
If you press the TALK button while scanning and
not within ten (10) seconds of receiving a
transmission, you will transmit on the
channel/privacy code on which you last received
a transmission. This will return the radio to
LISTENING MODE.
If you do not press any button within ten (10)
seconds, your radio will automatically resume
English
VibrAlert
®
and Call Alert
Your microTALK
®
radio can alert you to incoming
signals by sounding an audible call tone, by
vibrating silently, or both.
To Change Call Settings:
1. Press the MODE button until
the Call Setting icon flashes
on the display. The current
setting (“01” – Vibrate +
Ring, “02” – Vibrate Only,
or “00” – Ring Only) is
displayed.
2. Press the CHANNEL UP or
CHANNEL DOWN button to
change the call setting.
3. When your desired call setting is displayed:
a. Press the MODE button to enter the new
setting and proceed to other functions.
b. Press the LOCK button to enter the new
setting and return to LISTENING MODE.
c. Do not press any buttons for fifteen (15)
seconds to enter the new setting and return
to LISTENING MODE.
scanning CTCSS privacy codes.
During Scanning (while not receiving a
transmission), You Can Choose From The
Following:
a. Press and hold the TALK button to
communicate on either the channel or
channel/privacy code that was displayed
before you entered Mode Functions or
channel/privacy code on which, during
scanning, you last received a transmission.
This will return the radio to LISTENING
MODE.
b. Press the MODE button to proceed to next
available Mode Function.
c. Press the LOCK button to return to
LISTENING MODE on either the channel or
channel/privacy code that was displayed
before you entered Mode Functions or the
channel/privacy code on which, during
scanning, you last received a transmission.
Baby Monitor
With the Baby Monitor Function on, a radio left
near a baby will transmit to another unit on the
same channel and privacy code whenever a sound
is detected. Baby Monitor uses the same
sensitivity level you set for the VOX Function. If
you have not set a VOX sensitivity level (see the
“Voice Activated Transmit [VOX]” section of this
manual), the maximum sensitivity level 5 will
automatically be used.
Mode Button
Channel Buttons
Call Alert Icon VibrAlert
®
Icon
VibrAlert
®
&
Call Alert Icon
(24 pages)
(15 pages)
(25 pages)
(11 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals