Cobra CPI 200 CH Troubleshooting Guide Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 9
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
7
MAINTENANCE & SERVICE
6
TROUBLESHOOTING GUIDE
7
Maintaining Your
Inverter
Your CPI 200 requires very
little maintenance to keep
it operating properly. The
exterior of the unit should
be cleaned periodically with
a damp cloth to prevent
accumulation of dust and dirt.
Keep vents and fans free from
dust or debris.
Service
You can receive technical
assistance with your unit
through one of our customer
support services:
Automated Help Desk
is available 24 hours a day,
7 days a week at
773-889-3087.
Customer Service Operators
are available at
773-889-3087
Monday through Friday,
8:00 a.m. to 6:00 p.m.
Central Time.
Questions can be faxed
to 773-622-2269.
Automated Technical
Assistance is available
24 hours, 7 days a week
via e-mail at:
On-line answers to
frequently asked questions
can be found at:
www.cobra.com.
Cobra®, Nothing Comes
Close to a Cobra® and the
snake design are registered
trademarks of Cobra
Electronics Corporation, USA.
8
WARNING: This product contains lead, a chemical known to the State of California to
cause cancer and birth defects or other reproductive harm.
Wash hands after handling.
Problem/ Possible Solution
Symptom Causes
Low output voltage Overload Reduce the load.
No output voltage Low input Recharge battery.
voltage Check connections
and cable.
No output voltage High input Make sure the inverter
and "fault" voltage is connected to a
indicator is lit 12 volt battery.
Check regulation of
charging system.
No output voltage Thermal Allow inverter to cool down
when load is in shutdown Improve ventilation—
excess of 200 watts make sure ventilation
or 1.3 amperes openings in the inverter
are not obstructed. Lower
ambient temperature.
10271_CPI200CH_vB.qx 8/14/07 12:51 PM Page 8
Page view 4
1 2 3 4 5 6 7 8 9

Comments to this Manuals

No comments