Cobra XRS9950 Operations Instructions download pdf (Page 8)

Getting Started

Nothing Comes Close to a Cobra

Getting Started

Display Control

•

Illumination

The display illumination intensity can be adjusted to suit driving conditions:

■

Bright for daytime driving. (Factory default is Bright, then

Display Timeout after 30 seconds.)

■

Dim for dusk driving.

■

Dimmer for night driving.

■

Dark to blank the screen for discreet use. In this mode, alerts will sound,

but not show. (A dot will blink at the center of the screen to indicate the

detector is ON.)

You can adjust the illumination by pressing the Dim

button to step through

the levels in the sequence listed above.

Display Timeout

Your detector has a Display Timeout mode. When Display Timeout is turned

On (factory default is 30 seconds), the screen will change to Dark from Bright,

Dim, or Dimmer after the time interval selected in Menu mode (see page 13).

The Display Timeout setting can be changed so the display is always On.

NOTE

While at the Dark level under timer control, any alert or touching any button will

turn on the display at the last brightness setting (Bright, Dim, or Dimmer).

our Detector

English

IntelliShield Highway/City Modes

•

Your detector is equipped with IntelliShield false signal rejection technology

which consists of a Highway mode and three different levels of City modes:

City X, City X Beep Off and City X+K.

Highway mode provides full response to all signals detected. The City modes

reduce false alerts while you are driving in or near urban areas where there

are many sources for conflicting X or K band signals such as microwave

towers and automatic door openers. The factory setting is Highway. The

factory City mode default setting is City X; it can be changed in Menu mode

(see page 13).

You can toggle between Highway and City modes by pressing the City

button.

NOTE

When you change to City mode, the unit will enter whichever city

default mode is set at the time.

Muting an Alert

•

Your detector allows you to quickly turn Off an Audio Alert by momentarily

pressing the Mute

button. If you press the Mutebutton a second time

during the alert, the Audio Alert will be turned back On. After the current alert

is gone, the next alert will be heard.

Two other features are incorporated in your detector to automatically mute

or reduce the audio volume of alerts. See pages 17 and 18 for Intellimute

and Auto Mute modes.

Auxiliary Audio Jack

•

The Auxiliary Audio Jack can be used to connect external speakers in

environments with high ambient noise levels. The internal speaker will

be disconnected. (This uses a mini stereo audio connector.)

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 22 23

Comments to this Manuals

No comments

Cobra XRS9950 Operations Instructions Page 8

Comments to this Manuals

Related products and manuals for Radar detectors Cobra XRS9950