Cobra CPI 130 Troubleshooting Guide download pdf (Page 3)

4

2

QUICK CHECKOUT

Quick Checkout (continued)

To connect your inverter

to the power source:

1. If the power source is a DC

power supply, switch it off.

2. Insert the cigarette lighter

plug into your vehicle’s

cigarette lighter.

Testing

The inverter will come on

automatically. It should supply

power to the load. If the

inverter does not appear to

work properly, refer to the

Troubleshooting Guide on

page 7.

3

The location where you should

use your CPI 130 must be:

•

dry–Do not use the unit

where water can drip or

splash on it.

•

cool–Ambient air

temperature should be

between 30˚ and 105˚ F

(0˚ and 40˚ C). The cooler

the better.

•

ventilated–Allow at least

1 inch (3 cm) of clearance

around the unit for proper

air flow. Make sure that

ventilation openings on the

ends of the unit are not

obstructed.

To prevent fire, do not

cover or obstruct

ventilation openings.

The inverter must only

be connected to batteries

with a nominal output

voltage of 12 volts.

It will not work with

a 6 volt battery, and

will be damaged if it is

connected to a 16 volt

or greater battery.

CAUTION

CAUTION

OPERATION

3

USB

5V USB Port

10269_CPI130BK_vB.qx 8/14/07 12:38 PM Page 4

1 2 3 4 5 6 7 8 9

Comments to this Manuals

No comments