Cobra CPI 130 Troubleshooting Guide download pdf (Page 4)

4

CONTROLS & INDICATORS

5

OPERATING LIMITS

INPUT VOLTAGE/AUTO SHUTDOWN

Powering Up

To apply power to the CPI 130,

simply plug in to 12 Volt DC

source (cigarette lighter).

Power/Fault Indicator

The "fault" indicator of your

CPI 130 will light whenever

the unit detects excessively

high or low input voltage,

or begins to overheat.

CAUTION NOTE: Make sure

you unplug inverter from

power source before you

leave your vehicle.

5

Power Output

AC Output:

Your CPI 130 will deliver

130 watts continuously.

(NOTE: the wattage rating

applies to resistive loads.)

USB Output:

5 Volt continuous output.

Input Voltage

Your CPI 130 will operate

from input voltage ranging

from 10 to 15 volts.

Optimum performance occurs

when the voltage is between

12 and 14 volts.

The inverter will automatically

shut down if the input voltage

drops below 10.0 ± 0.3 volts.

This protects the battery

from being over-discharged.

The inverter will restart when

the input voltage exceeds

12.0 ± 0.3 volts.

The inverter will also shut

down if the input voltage

increases to 15.5 ± 0.5 volts.

This helps protect the unit

from damage due to excessive

input voltage. Although the

inverter is protected in this

way, it may still be damaged

should the input voltage

exceed 16 volts.

Automatic Shutdown

The unit will automatically

go into thermal shutdown if

it becomes overheated due to

excessive input voltage, poor

circulation or high ambient

temperature.

6

130 Watts

Cigarette Lighter Plug

Power/Fault Indicator

10269_CPI130BK_vB.qx 8/14/07 12:38 PM Page 6

1 2 3 4 5 6 7 8 9

Comments to this Manuals

No comments