Cobra CPI 200 CH Troubleshooting Guide download pdf (Page 3)

4

2

QUICK CHECKOUT

3

The location where you should

use your CPI 200 must be:

•

dry–Do not use the unit

where water can drip or

splash on it.

•

cool–Ambient air

temperature should be

between 30˚ and 105˚ F

(0˚ and 40˚ C). The cooler

the better.

•

ventilated–Allow at least

1 inch (3 cm) of clearance

around the unit for proper

air flow. Make sure that

ventilation openings on the

ends of the unit are not

obstructed.

To prevent fire, do not cover

or obstruct ventilation

openings.

The inverter must only

be connected to batteries

with a nominal output

voltage of 12 volts.

It will not work with

a 6 volt battery, and

will be damaged if it is

connected to a 16 volt

or greater battery.

CAUTION

CAUTION

OPERATION

3

Quick Checkout (continued)

To connect your inverter

to the power source:

1. If the power source is a DC

power supply, switch it off.

2. Insert the cigarette lighter

plug into your vehicle’s

cigarette lighter.

3. Press and release

power button.

4. Connect load to AC outlet

or USB port.

5V USB Port

Power Button

AC Receptacle

Power/Fault

Indicator

Power On

Indicator

10271_CPI200CH_vB.qx 8/14/07 12:51 PM Page 4

1 2 3 4 5 6 7 8 9

Comments to this Manuals

No comments