Cobra CPI 850 User Manual download pdf (Page 16)

Section 3: Configuration

16 AXIS 370 Cobra User’s Manual

System language

Printer driver

Emulation



Conﬁguration from a Terminal

The AXIS 370 Cobra is equipped with a menu-driven Configuration

Utility. This provides a step-by-step method to adapt the AXIS 370

Cobra to your IBM coax host and printer. Follow these steps to start

the configuration:

1. Switch off the AXIS 370 Cobra.

If the power is taken from an

attached printer, then switch the printer off. If you are using an

external power supply, unplug the power cord.

2. Connect a terminal to the AXIS 370 Cobra via a coax cable,

and switch the terminal on.

If your terminal is of the DFT type

it is necessary to set it to Control Unit Customization mode so

that it operates as a CUT terminal.

3. Set the rotary switch in position ‘0’ and switch the AXIS 370

Cobra on.

The System indicator should now flash rapidly.

Within a few seconds, the Key Definitions Menu should appear on

your terminal.

The rest of Section 3 is a guide to the Configuration Utility. If you

want to restart the configuration, switch the AXIS 370 Cobra off and

on.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 73 74

No comments

Cobra CPI 850 User Manual Page 16