Cobra CPI 850 User Manual download pdf (Page 50)

Section 5: Solving Problems

50 AXIS 370 Cobra User’s Manual

Reporting Problems

If you run into problems that you can’t solve on your own, it is

important that you make an error report for your System Manager or

distributor. The error report should include:

• A printout with a description of the errors

• If possible, a correct printout

• A Parameter List

• A System and ASCII hexdump

If you need technical support, please contact your dealer. If they can’t

help you, they will forward your request through the appropriate

channels.

If you are connected to Internet, have a look at the Axis WWW Home Page

at http://www.axis.se/. Here you can find information about the company

and our products. You can also down-load on-line manuals, tools such as the

Acrobat Reader for different platforms, and the latest versions of the software

utilities. You can also get files and information through anonymous ftp: log

in to ftp.axis.se and go to the /pub/axis directory, or enter

ftp://ftp.axis.se/pub/axis in your WWW browser.

Printing the

Parameter List

The Parameter List shows the complete configuration. A selection of

parameters are described in Appendix A. To print the Parameter List,

do as follows:

1. Make sure that your printer is on-line.

2. Set the rotary switch to ‘9’, and wait for approx. 3 seconds

until the SYSTEM indicator starts to flash. You are now in the

Test Mode.

3. Set the rotary switch to ‘8’ to start the printout.

4. Set the rotary switch to ‘9’ when the printout is completed.

The SYSTEM indicator will stop flashing.

5. Select position ‘0’ to resume normal print operation.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 73 74

No comments

Cobra CPI 850 User Manual Page 50