Cobra Combi Operations Instructions download pdf (Page 16)

Start and stop

Cold start

1. Close the choke by turning the choke control

anticlockwise to position (CHOKE).

2. Push the throttle lever down and pull the starter

handle.

3. When the machine ignites, open the choke one

step clockwise towards position (RUN). Let the

machine run for a 30-60 seconds warm up

period.

Restarting a warm machine

If a hot engine stops after a short while or does not

start at all, use the following restart procedure:

1. Check that the choke is open (in position RUN).

2. Pull the starter handle.

3. If the machine still does not start follow the

procedure for "Cold start" or see the section

"Troubleshooting".

Stopping

1. Stop the machine by sliding the stop button on

the left handle forward.

Operating

Starting a cut

♦

Stand in a stable position with your feet well away

from the inserted tool.

♦

Press the machine against the working surface

before you start.

♦

The working speed of the machine is controlled

via the throttle lever.

♦

Start collaring at such a distance from the edge

that the machine is capable of breaking the

material without leverage.

♦

Never break off too large pieces. Adjust the

breaking distance (A) so that the inserted tool does

not fasten.

Breaking

♦

Never use the machine as a lever, the material

should be broken by impact energy.

♦

Let the machine do the work. Never press too

hard. The vibration absorbing handle should never

be forced all the way to the bottom.

♦

Release the throttle lever when the machine is

lifted.

Original instructions

COBRA COMBISafety and operating instructions

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

Cobra Combi Operations Instructions Page 16

Comments to this Manuals

Related products and manuals for Power drills Cobra Combi