Cobra Combi Operations Instructions download pdf (Page 19)

Fitting a new starter cord

4. Oil the needle bearing in the starter pulley.

5. Fit the starter pulley and protective cover

together, so that the starting spring locates in the

starter pulley.

6. Wind the full length of the cord onto the pulley.

7. Pre-tension the starting spring by one turn

(clockwise) before fitting the assembly into place.

8. Pull the starting handle carefully, in order to

locate the cover correctly.

9. Fit and tighten the hexagonal bolts and the PTO

screw-cap.

Troubleshooting

If the engine does not start, is difficult to start, runs

unevenly or has poor output, check the points

mentioned below.

♦

Check that the Stop button is in the ON position.

♦

Check the fuel level.

♦

Check the spark plug’s electrode distance.

♦

Check that the air filter is not blocked.

♦

Check that the fuel filter is not blocked.

♦

If the machine still does not work satisfactorily

following this procedure, please contact your

nearest authorised Atlas Copco workshop.

Storage

♦

Empty the tank before storing the machine.

♦

Check that the machine is properly cleaned before

putting it away for storage.

♦

Store the machine in a dry place.

♦

We recommend to store the machine in a standing

position. If stored in a lying position, the machine

must be placed on the back cover.

♦

Keep the machine and tools in a safe place, out

of the reach of children and locked up.

Disposal

A used machine must be treated and deposed of in

such a way that the greatest possible portion of the

material can be recycled and any negative influence

on the environment is kept as low as possible, and

in respect to local restrictions.

Before a petrol driven machine is deposited it must

be emptied and cleaned of all oil and petrol.

Remaining oil and petrol must be dealt with in a way

that does not affect the environment.

Original instructions

Safety and operating instructionsCOBRA COMBI

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

Cobra Combi Operations Instructions Page 19

Comments to this Manuals

Related products and manuals for Power drills Cobra Combi